Orlando and the communities around it, Conway, Belle Isle, Edgewood, Pine Castle, and Taft, make up a large part of what we cover across Orange County. The mix here runs wide: apartment buildings cycling through tenants, commercial properties with rooftop units, older homes still running equipment that was installed before current efficiency standards, and newer builds where the system is fine but the controls have never been updated. Whatever the property type, the call starts the same way.
We handle AC repair, heat pump repair and installation, full system replacement, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality work, and seasonal maintenance across the area.
Call (689) 356-6532 to get a quote, and we will scope the job on the phone before anything is scheduled.
The price for a repair call depends on what the inspection finds. A capacitor swap and a refrigerant recharge are different jobs with different costs, and the technician cannot quote one until the system has been assessed. What moves a number is the fault itself, where the equipment is located and how accessible it is, and whether the situation calls for a repair or points more clearly toward a replacement.
For a full system replacement, the quote is based on a load calculation for the space. That determines the right equipment size, which affects both the equipment cost and the installation scope. A quote that skips that step is a guess, and a system sized wrong for the space will underperform regardless of what it cost.
The rate for the visit is confirmed on the phone before it is scheduled. You are told what the visit covers and what it costs. If the inspection finds something beyond the original scope, that is explained and priced separately before any additional work is authorized. Ask what the quote includes and you get a straight answer.
Call (689) 356-6532 to get started.
High indoor humidity is one of the most common comfort complaints in this region, and it does not always announce itself clearly. A home that feels warmer than the thermostat says, condensation on windows, or a persistent musty smell are all signs that moisture is winning. The AC removes some humidity as a byproduct of cooling, but it was not designed to handle the load on its own, especially in a climate where the air outside rarely dries out.
A whole-home dehumidifier integrates directly with the existing air handler and manages moisture independently of the cooling cycle. It uses humidity sensing to maintain a set level throughout the house automatically, without any manual adjustment. The installation covers sizing the unit to the home's square footage, integration with the air handler and blower, and a full test before the visit ends.
A high-efficiency filter or a whole-home air purifier works alongside the HVAC system to reduce particulates, allergens, and airborne contaminants at the source. In a city the size of Orlando, where multi-unit buildings and commercial spaces cycle through occupants regularly, indoor air quality matters beyond just comfort. We assess the existing filter setup, identify where it is falling short, and recommend upgrades that make a measurable difference to what the system is actually delivering.
An older thermostat holds one temperature, set by hand. A modern programmable or smart control adjusts the system around occupancy, time of day, and the actual conditions in the space. For a landlord managing multiple units, remote monitoring means a system failure shows up on a phone rather than in a tenant complaint. For a homeowner, a zoning setup means different areas of the house can be conditioned independently, which matters in a large home where the bedrooms and the living areas have different patterns of use.
Replacing a thermostat is often worth doing on its own, separate from any equipment work. If the existing control is not communicating correctly with the air handler, the system will short-cycle or fail to reach the set temperature regardless of how well the equipment itself is working. We check the wiring and confirm compatibility before recommending anything, and the installation ends with a full test of the system cycling in both modes.
We take calls every day from 7:00 AM to 9:00 PM. When you call, the job is scoped on the phone: what the system is doing, what equipment is involved, and what access is needed. That information travels with the visit so the technician arrives knowing what to look for rather than starting from scratch. Seasonal maintenance scheduled around your calendar means the visit happens when it works for the property, not when it happens to be convenient for us.
A no-cool call in the middle of an Orlando summer is not a situation to wait out. We handle emergency calls for systems that have stopped working entirely, units that are running but producing no temperature change, and the occasional no-heat call when temperatures drop. The process is the same as any other call: the scope is confirmed on the phone, the rate is explained before the visit is booked, and the system is tested before we leave.
For a commercial space or a rental property with tenants in place, we work around the occupancy. That means confirming access in advance, coordinating with whoever is on site, and getting the system back to working condition without disrupting the property more than the repair requires. When you call, we confirm the details and set up the visit around what the property actually needs. It is all set out on our full list of HVAC services.
A condenser unit that is running but not cooling, making a grinding or rattling noise, or tripping the disconnect repeatedly is usually pointing to a compressor or electrical component problem. A failed capacitor or contactor is a common cause and a straightforward repair when caught early. A compressor that has seized is a more significant finding, and at that point the age and condition of the rest of the system becomes part of the conversation. Older equipment assessed on its own merits sometimes still has useful life in it. The inspection covers both the component and the context.
Low airflow at the registers can come from a clogged filter, a failing blower motor, a collapsed duct section, or a refrigerant issue that has frozen the evaporator coil. Each of those needs a different fix, and guessing without looking at the full system is how a repair call turns into a second one. We check the air handler, the duct connections, and the coil condition before drawing any conclusions.
A heat exchanger inspection matters when the system is producing heat but something about the air quality or the combustion pattern is off. Cracks or deterioration in the exchanger are not always visible without a proper inspection, and the consequences of missing one are serious. If a system is showing symptoms that point in that direction, the inspection is the right first step. Clear communication from the first call to the final test means the findings are explained before any decision is made.
Gas furnaces are not common in this part of Florida, but they do exist in some older properties and in commercial buildings with specific heating requirements. A furnace that is not igniting, cycling off before the space reaches temperature, or producing an unusual smell needs a diagnostic visit rather than a reset. We confirm on the call whether the equipment is something we can address and schedule accordingly.
We cover Orlando and the surrounding communities in Orange County, including Conway, Belle Isle, Edgewood, Pine Castle, and Taft. Whether the property is a single-family home, a multi-unit building, or a commercial space, the service area covers it. Work carried out to code on every job means the installation or repair meets the standards that apply in this area, which matters for performance and for any future inspection.
If you are not sure whether your address falls within the area, call (689) 356-6532 and we can confirm it on the phone.
Yes, on both counts. A larger commercial space requires a load calculation to size equipment correctly, and an older building may have ductwork or electrical conditions that affect the scope of the work. The quote is built around what the inspection finds rather than a flat figure for the square footage.
Call (689) 356-6532 and we will scope the job on the phone before anything is scheduled.
Yes. A proper diagnosis covers both the air handler indoors and the condenser unit outdoors, because the two are part of the same system and a fault in one often shows up as a symptom in the other. Checking only one side of the system risks missing the actual cause of the problem.
A tune-up is a preventive maintenance visit: coil cleaning, refrigerant level check, electrical connection inspection, condensate drain flush, and filter assessment. A diagnostic visit starts with a symptom and works backward to the cause. The two can overlap if a maintenance visit turns up something that needs attention, but they are scoped and priced differently. Either way, the rate is confirmed before the visit is booked.
For a property with multiple systems, we coordinate access and scheduling unit by unit, and the scope for each is confirmed separately before any work begins. A property manager does not need to be on site for every visit, but access details need to be confirmed on the call when the appointment is booked. If one unit has a fault that points to a systemic issue across the building, we explain that finding before recommending anything further.
Call as early as possible if the date needs to change. We will work out what the schedule allows and confirm a new date on the call. The more notice, the more options there are.
When you call us, the job gets scoped on the phone, not guessed at. You do not need to know what is wrong before you call. Telling us what the system is doing, or not doing, is enough to start.
Call (689) 356-6532 and we will work out what it needs.
Quick response. Careful diagnosis. Clean install.
Heating and cooling service reaches these neighboring areas too: Conway, Belle Isle, Edgewood, Pine Castle, Taft.
Every heating and cooling job we handle in Orlando starts the same way: a call where we scope the work, confirm the rate, and explain what the visit covers before anything is scheduled. The table below lays out the services we offer, what each one includes, and who it fits best. Use it to find the right starting point, then call us and we will walk through the specifics for your home or property.
| Service | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Whole-Home Dehumidification & Humidity Control | Humidity level assessment, Dehumidifier sizing and installation, Air handler integration, Humidity setpoint configuration | Orlando homes where the AC is running but the space still feels muggy or where mold growth has become a recurring problem | High indoor humidity makes a properly cooled home feel warmer than it is and puts extra strain on the AC system. A dedicated dehumidifier manages moisture independently of the cooling cycle. |
| Full HVAC System Installation & ReplacementMost Popular | Load calculation and equipment sizing, Removal of existing unit, Installation and refrigerant charge, Full system commissioning and test | Homeowners or property managers whose system has failed repeatedly or where repair cost approaches replacement cost | A system's age and repair history both belong in the replacement decision. We assess older equipment on its own merits before recommending a full replacement. |
| Emergency HVAC Service | Diagnostic call scheduling, Emergency AC and heat pump repair, System-down assessment, Priority scheduling for urgent calls | Any situation where the system has stopped working entirely and the home or building is losing comfort fast | When you call, the job gets scoped on the phone before the visit is scheduled. That means the person who comes out arrives with the right information. Emergency calls are handled every day from 7:00 AM to 9:00 PM. |
Call us at (689) 356-6532 and we will walk through your situation, confirm what the visit covers, and give you a rate before anything is scheduled.
(689) 356-6532